home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 2
/
Gold Medal Software Volume 2 (Gold Medal) (1994).iso
/
netutils
/
iqueue.arj
/
IQ.DOC
< prev
next >
Wrap
Text File
|
1993-01-06
|
33KB
|
857 lines
INTRODUCING I-QUEUE!
(c) Copyright 1991-92 by
▄▄████▄▄
▄█▀█▄ ▄█▀▀ ▀▀███▄
█▀ ▀█▄█▀ ███
▀█▄ ▄█▀ ▀█▄▄ ▄██▀
▀▀▀ ▀▀▀▀▀▀
███ ▄███ ███ ███ ▄██
███ ▄▄▄ ▄▄▄ ▄███▄ ▄▄▄ ▄▄▄ ▄▄▄ ▄▄▄ ▄███▄ ▄▄▄▄
███ ███▀ ███ ███ ███ ███▀ ███ ███ ███ ███▄██
███ ███ ███ ███ ███ ███ ███ ███ ███▄ ▀██▄▄▄
T E C H N O L O G I E S
11433 Cronridge Drive, Suite H
Owings Mills, MD 21117
+1-410-363-1097
FAX: +1-410-363-3779
MHS: Support @ Infinite
CompuServe: >MHS:Support @ Infinite (or 73270,405)
Internet: Support@Infinite.MHS.CompuServe.com
Technical Support provided on the CompuServe Information Service in
NOVVEN Section 4
OVERVIEW
I-Queue! simplifies printing in the Novell NetWare environment.
From a small memory-resident pop-up (0 to 2-1/2KB), I-Queue! allows
users to easily change NetWare print queues and modify "capture"
parameters.
I-Queue! for Windows is a convenient Windows application that
adds similar conveniences for Windows users, combining NetWare
print queue selection and Windows print driver selection into
a single menu.
Key features include:
* Select a file server/print queue for caputuring
* Capture your output to a file
* Select the number of copies
* Enter or choose printer setup strings from existing PRINTDEF
information
* Select forms
* Ability to select from pre-defined PRINTCON job configurations
* Select timeout interval
* Enable or disable form feed
* Expand or disable tabs (text or binary mode)
* Enable or disable banner
* Notify when job is printed (available with Novell's PSERVER and
several other third-party print servers)
Users can also easily display a list of jobs in any queue to
determine the status of a job, as well as deleting or changing
the parameters of any job that they submit before it prints.
Queue operators have the added capability of deleting print jobs,
moving and copying jobs between print queues, and re-ordering the
position of jobs in the queue.
I-Queue! also includes the following additional utilities:
OnHold is a TSR which allows users to submit print jobs that can
automatically be placed "on hold", or delayed for printing at a
later time.
DefCap allows you to modify CAPTURE parameters from the
command-line, but only modifies the specified parameters, leaving
all others intact.
Com2Lpt allows you to redirect serial (COM) port output to a
parallel (LPT) port, provided that your application prints
through the BIOS or DOS, and not directly to the serial port
hardware.
CreateQ allows you to create NetWare print queues where the
temporary files are stored on a volume other than SYS:.
Also available from Infinite Technologies is I-Queue! Server,
a TSR print server for Novell NetWare networks. I-Queue! Server
boasts Windows compatibility and 2 to 4 times the printing
speed of Novell's RPRINTER, among other capabilities. I-Queue!
Server can be downloaded separately as IQS.ZIP, and is available
in a special bundle offer with I-Queue! (See the ordering
information later in this documnt.)
INSTALLING I-QUEUE!
1.) LOGIN TO YOUR FILE SERVER AS SUPERVISOR OR A SUPERVISOR-EQUIVALENT.
2.) COPY I-QUEUE! TO YOUR SERVER
Copy I-Queue!'s program files into SYS:PUBLIC or another
appropriate directory on your file server. The following
files are required to be accessible to all I-Queue! users.
DOS Version:
IQ.COM
IQ.OVR
IQ.HLP
VIDEO.OVR
IQPOPUP.COM
ONHOLD.EXE
DEFCAP.EXE
CREATEQ.EXE
COM2LPT.COM
Note: If you are running other Infinite Technologies'
utilities, they share a common VIDEO.OVR file. Use the
VIDEO.OVR with the most recent date stamp.
Windows Version:
IQW.EXE
IQW.HLP
IQMW.EXE
IQMW.HLP
3.) RUN IQINSTAL OR IQSERIAL TO INITIALIZE I-QUEUE!
Run IQINSTAL.EXE to initialize the I-Queue! 30 day trial period.
If this is a purchased copy, run IQSERIAL to initialize I-Queue!
for your network.
4.) RUN PRINTDEF TO DEFINE YOUR NETWORK PRINTERS. (DOS Version ONLY)
This option is not required if you are only running I-Queue!
Windows version.
I-Queue! runs best when PRINTDEF has been used to create setup
strings that can be made available for users.
Execute the Novell PRINTDEF utility and select "Print Devices".
NetWare comes with drivers for a variety of different printer
types (the .PDF files located in SYS:PUBLIC). It is best to use
these as a starting point. Select "Import Print Device" and
enter SYS:PUBLIC as the path under "Source Directory". This will
give you a list of available printer definition files (PDFs).
Import that definitions for any printer types that you use on
your network with PRINTDEF.
Refer to your NetWare documentation for additional information
on PRINTDEF.
5.) RUN IQSETUP TO CONFIGURE I-QUEUE! (DOS Version ONLY)
This option is not required if you are only running I-Queue!
Windows version.
The IQSETUP.EXE utility allows you to define some additional
information for use by I-Queue!
Most importantly, the "Queue Defaults" option allows you to
define a descriptive name and default printer type definition
for each NetWare print queue. This way, when selecting setup
strings for jobs directed to a particular queue, you can press
<Insert> in I-Queue! to see a list of pre-defined setup strings
for the type of printer to which the queue is directed.
Printer types must first be defined using the NetWare PRINTDEF
utility, as described in #4 above.
Additional options in IQSETUP include:
"Enable Q_OPERATORS to Move/Copy print jobs" - In order for
I-Queue! to be able to move and/or copy jobs between print
queues, special rights must be given to the user. This option
will grant all necessary rights to the defined Queue Operators
of a queue. Queue operators are defined in the NetWare PCONSOLE
utility.
"Copy SUPERVISOR's Printcon.Dat to each user" - NetWare's PRINTCON
job configuration information is maintained on a user by user
basis, i.e., each individual has their own Printcon.Dat configuration
file. Most LAN administrators would prefer to create one
Printcon.Dat file that is shared by all users. This option
copies the SUPERVISOR's Printcon.Dat file to all users.
"Make SUPERVISOR's Printcon.Dat GLOBAL" - This option copies
the SUPERVISOR's Printcon.Dat file to SYS:PUBLIC for use as
a global Printcon.Dat file. If you select this option,
you will need to also select the option that follows.
"Modify NetWare utilities to support Global Printcon" will
configure the NetWare utilities PRINTCON, NPRINT and CAPTURE
to work with this global Printcon.Dat file.
"Modify NetWare utilities to support Local Printcon" reverses
the modifications made by the previous option.
6.) DEFINE DEFAULT WINDOWS PRINT DRIVERS FOR I-QUEUE! WINDOWS:
One of the most important features of I-Queue! Windows is its
ability to have default Windows print drivers defined for each
NetWare print queue.
When I-Queue! Windows is initially installed, the system
administrator should establish a default Windows print driver or
each print queue.
This can be done via the I-Queue! Manager program (IQMW.EXE or
the "Manage Queue" button in I-Queue!).
Within I-Queue! Manager, select "Queues" from the main menu bar,
highlight a queue, and select the "Options" button. The "Default
Printer" defines the Windows print device that should be
associated with this queue as a default.
It is recommended that you specify a descriptive name for each
print queue, and define an associated Windows print driver.
7.) PRE-REQUISITE NETWARE DLLS (WINDOWS VERSION)
I-Queue! Windows uses several of the NetWare Windows DLLs.
Specifically, NWNETAPI.DLL is required.
A copy of this DLL can be obtained from the NOVLIB forum
on CompuServe. The current filename is WINUP7.ZIP in
NOVFILES, but it is subject to change.
8.) INSTALLATION / CONFIGURATION COMPLETE -
PROCEED TO LOADING I-QUEUE!
LOADING I-QUEUE! (DOS)
To load I-Queue!, simply type IQ.
If you wish to take advantage of the additional capabilities of
the OnHold utility to enable submitting print jobs that are
automatically put on hold or delayed for later printing, then
you should also load the ONHOLD.EXE program into memory.
Optional command-line parameters for IQ.COM include:
/NR tells I-Queue! to run non-resident. This is recommended
when running under a task switching environment or Microsoft
Windows.
/NE tells I-Queue! not to use Expanded memory for swapping.
/NX tells I-Queue! not to use Extended memory for swapping.
/NU tells I-Queue! not to use 386-to-the-MAX or QEMM upper
memory blocks to reduce conventional memory overhead.
/D tells I-Queue! not to use Expanded or Extended memory for
swapping, and to swap to disk. (I-Queue! will swap to disk
by default if insufficient expanded or extended memory is
available.) Note: I-Queue! creates a swap file in C:\ or
the directory specified via the DOS TMP environmental
variable. I-Queue! is NetWare aware, so multiple
workstations can safely use the same TMP directory.
/U unloads or de-installs I-Queue!.
You can also change I-Queue!'s default hot-key of <ALT>-<Q> via
the command line with the following command line parameters:
# Tells I-Queue! to use <CTRL> instead of <ALT> in the hot-
key.
% Tells I-Queue! to use <CTRL>-<ALT> instead of just <ALT>
in the hot-key.
& Tells I-Queue! to use <CTRL>-<LEFT SHIFT> instead of
<ALT> in the hot-key.
! Tells I-Queue! to use <ALT>-<LEFT SHIFT> instead of
<ALT> in the hot-key.
A-Z Any alphabetic character from A to Z can be specified
to work in conjunction with <ALT> or <CTRL> in the hot-
key.
Fxx Any function key (F1-F12) can be specified to work in
conjunction with <ALT> or <CTRL> in the hot-key.
Examples:
IQ alone defaults to the <ALT>-<Q> hot-key, or if I-Queue!
has already been loaded, the hot-key is not changed.
IQ X tells I-Queue! to use <ALT>-<X> as its hot-key.
IQ #Z tells I-Queue! to use <CTRL>-<Z> as its hot-key.
IQ F12 tells I-Queue! to use <ALT>-<F12> as its hot-key.
IQ %F5 tells I-Queue! to use <CTRL>-<ALT>-<F5> as its hot-key.
IQ &Z tells I-Queue! to use <CTRL>-<LEFT SHIFT>-<Z> as its
hot-key.
IQ !F1 tells I-Queue! to use <ALT>-<LEFT SHIFT>-<F1> as its
hot-key.
POPPING UP I-QUEUE! (DOS)
Press the I-Queue! hot-key defined when loading I-Queue!, and the
I-Queue! menu will be displayed.
For more information about the I-Queue! menu options, press <F1>
for help.
If you wish to pop-up I-Queue! from within a batch file without
pressing the hot-key, execute the command IQPOPUP.COM after
I-Queue! has been loaded.
A couple of additional configuration options should be mentioned.
If you want users to default to the Printcon Job Configuration
selection window when popping up I-Queue!, set the following
DOS environmental variable: SET IQQUICK=Y
If you experience problems where your video display is corrupted
when popping up or exiting I-Queue!, this is due to a bug in your
VGA card's BIOS. Load the small memory-resident utility VGASAVE.COM
provided in the IQUEUE.ZIP file before loading IQ.COM on any
workstations that exhibit this behavior.
SPECIAL I-QUEUE! SETTINGS (DOS)
The IQQUICK environmental variable can be used to configure
certain operations of I-Queue! DOS.
Issue a SET IQQUICK= command in your AUTOEXEC.BAT file or
system login script to configure the desired mode of execution.
IQQUICK=q
When I-Queue! is popped up, the user is immediately prompted
for a print queue selection. After a queue is selected, if
the user presses Enter, they exit I-Queue! If Escape is pressed
they remain in I-Queue!
IQQUICK=Q
Similar to IQQUICK=q, except that the user always remains in
I-Queue! until they exit.
IQQUICK=j
When I-Queue! is popped up, the user is immediately prompted
for a printcon job selection. After a job is selected, if
the user presses Enter, they exit I-Queue! If Escape is pressed
they remain in I-Queue!
IQQUICK=J
Similar to IQQUICK=j, except that the user always remains in
I-Queue! until they exit.
LOADING I-QUEUE! (WINDOWS)
I-Queue! Windows is separated into two executable programs:
IQW.EXE is the program that allows you to modify your current
"CAPTURE" parameters.
IQMW.EXE is the program that allows you to manage print queues
and jobs already in hhe print queue. (IQMW.EXE is automatically
executed when you select the "Manage Queues" option in IQW.EXE.)
You can use the File New option in Program Manager to define
one or both programs to a program group (or the startup group.)
For help within I-Queue! Windows, press F1 at any time.
USING ONHOLD!
OnHold is a small (<3k) TSR that changes the default action of
CAPTURE/NPRINT. Normally print jobs are created without a hold on
them allowing them to be printed immediately. OnHold causes print
jobs to be created with a USER_HOLD, preventing them from being
printed. This allows the user or an operator to schedule them to
print at a later time, to move them to another queue, or change
any parameters that may need changed.
Command usage:
OnHold - Installs OnHold (if already installed
it enables OnHold)
OnHold /D - Disables OnHold (leaving it resident)
OnHold /U - Un-installs OnHold
For average usage with I-Queue!, it is recommended that you load
OnHold with the /D parameter (initially disabled), and then
use I-Queue! to put a hold or delay on jobs.
USING DEFCAP!
The DefCap utility allows you to modify CAPTURE parameters from
the command-line, but only modifies the specified parameters,
leaving all others intact.
For example, if you have a particular application that requires
a higher timeout and no added form feed, you can issue the
command DEFCAP TI=80 NFF. This maintains all otehr current
CAPTURE parameters, and only changes TI=80 and NFF.
DEFCAP supports the following parameters:
DefCap V1.0
(c) Copyright 1991 by Infinite Technologies
Usage: defcap [options]
Options:
/A Autoendcap
/B enables Banner
/B=<name> enables Banner and set banner text to <name>
/C=<number> number of Copies
/FF FormFeed
/L<printer> Local printer #
/LPTx Local printer #
/NA NoAutoendcap
/NB No Banner
/NFF No FormFeed
/NOT Notify when printed
/NN No Notify
/NT No Tab expansion
/SH SHow options
/Tabs=<#> Tab size
/Ti=<#> TImeout count (seconds)
USING CREATEQ!
The CreateQ utility allows you to create NetWare print queues that
store their temporary queue files on volumes other than SYS:
USAGE:
CreateQ <queuename> <pathname>
1.) Login as supervisor & map a drive to the volume where you want
queue files stored.
Ex. (assuming you have a volume named VOL1)
MAP Q:=VOL1:
Q:
2.) Create a "containing" directory to hold the actual queue directories.
Ex.
MD\QUEUES
3.) Create a queue using CREATEQ
Ex. (creating a new queue name NEWQUEUE)
CREATEQ NEWQUEUE VOL1:QUEUES
4.) Use PCONSOLE to add users,operators and servers.
USING COM2LPT!
The Com2LPT utility allows you to redirect output being sent to COM
ports to an LPT port, so that it can be redirected to a network
print queue.
However, this utility will only work with programs that perform
their serial output using BIOS or DOS functions. Programs that
print directly to the serial port are out of luck.
USAGE:
/U unloads Com2Lpt from memory, only if Com2Lpt was the last program
loaded into memory.
/C# where # is the COM port to be redirected to an LPT port.
/L# where # is the destination LPT port (0 to cancel redirection).
ORDERING I-QUEUE!
-----------------
I-Queue!, the NetWare Printing Toolbox, is currently available for $199,
for unlimited use on a single file server.
I-Queue! Server is currently available for $149, for unlimited use on a
single file server.
Or, both can be purchased together as the I-Queue! Bundle for $249, for
unlimited use on a single file server.
Dealer inquiries are invited!
COST
Please rush me ___ copies of the I-Queue! Bundle for $249 each ____________
Please rush me ___ copies of I-Queue! Toolbox for $199 each ____________
Please rush me ___ copies of I-Queue! Server for $149 each ____________
Disk Size: ___ 3-1/2 ___ 5-1/4
Maryland residents add 5% sales tax ____________
Shipping and Handling (UPS Ground Service) * _______$8___
============================================================================
TOTAL ____________
Name: __________________________________________________________________
Company: __________________________________________________________________
Address: __________________________________________________________________
City: _____________________ State: ________ Zip: ___________________
Country: _____________________
Telephone Number: _________________________________________________________
FAX Number: _________________________________________________________
CompuServe ID: ___________________
MHS Address: ___________________ (via _________)
Method of Payment: ___ Visa ___ Master Card ___ Check Enclosed
Card #: _________________________________
Name of Cardholder: _________________________________
Signature: _________________________________
Expiration Date: _________________________________
* Overseas payments by Visa or Master Charge only. There will be
an additional charge applied for shipping costs to reflect the
actual cost of shipment.
INFINITE TECHNOLOGIES
11433 CRONRIDGE DRIVE, SUITE H
OWINGS MILLS, MD 21117
(410)-363-1097
FAX your credit card orders -- (410)-363-3779
PRODUCTS FROM INFINITE TECHNOLOGIES
===================================
Infinite Technologies offers innovative and easy-to-use software
solutions, designed primarily for the networked environment.
We back our products with dependable service and special attention
to individual requirements. All of our programs are easy to learn
and use, and are designed to increase your efficiency.
We also want to help keep you up-to-date with product information,
updates and technical support.
These services are provided via the following mechanisms:
On the CompuServe Information Service, Infinite Technologies offers
support and product updates in Section and Library 4 of the NOVVEN
forum.
Via MHS (through CSERVE or NHUB), you can address technical support
and/or product information inquiries to SUPPORT @ INFINITE.
You can also subscribe to our MHS Librarian! mailing list, which
will include notices of product updates. To join this mailing
list, send a message via MHS (CSERVE or NHUB) to LIBRARY @ INFINITE
with SUBSCRIBE on your subject line. (CompuServe users can send a
message to >MHS:Library@Infinite via CompuServe Mail.)
For an index of files available via LIBRARY @ INFINITE, send a message
with INDEX on your subject line.
NETWORK UTILITIES
-----------------
* I-Queue! - Simplifies network printing and print queue management
in the Novell NetWare environment. From within a small memory
resident pop-up (0 to 2-1/2KB), I-Queue! allows users to easily
change NetWare print queues and modify "capture" parameters.
I-Queue! is compatible with Novell's PRINTCON/PRINTDEF and adds
global PRINTCON support for Novell's own utilities.
Queue management capabilities include: delete/reorder print jobs,
move/copy jobs between queues, and hold/delayed printing.
NOW INCLUDES A WINDOWS VERSION!
* I-Queue! Server - Turn printers attached to any network workstation
into shared network printers. Two to four times faster than RPRINTER,
compatible with workstations running Windows, and compatible with
printer ports that do not provide "hardware interrupt support".
* LockIT! - Intelligent Security for DOS & Windows workstations
on Novell NetWare networks. LockIT! addresses the problem of
users leaving workstations unattended, and the security issues
that this presents. Unlike other solutions that will reboot or
logout a workstation after a period of "inactivity", potentially
leading to data loss, LockIT! locks out keyboard input until you
enter your NetWare password...even allowing unattended processes
to continue executing.
* CastAway! - A better NetWare broadcast message trap. Get NetWare
message notification (e.g., SEND) without your PC locking up until
you press CTRL-ENTER! Get notified of new messages while in graphics
based applications! All in 0 to 1-1/2KB of conventional memory!
* PopIT! - Gain pop-up access to almost ANY program with less than
2-1/2 KB overhead. Network administrators -- access SYSCON,
RCONSOLE, FCONSOLE and all of your favorite network utilities
without leaving your current application.
* OnCall! - A memory resident "Chat" utility for Novell NetWare,
that runs in between 0 and 2-1/2 KB of workstation memory.
Simple, straightforward, and easy to use. NOW INCLUDES A
WINDOWS VERSION!
EXPRESSIT! ELECTRONIC MAIL
--------------------------
* ExpressIT! Electronic Mail - The ExpressIT! Electronic Mail product
family includes the following products:
* ExpressIT! - The network version of ExpressIT!, including
the MHS-compatible DOS version, which runs in less than 2KB of
resident memory.
* ExpressIT! Remote - A remote version of ExpressIT! (DOS) customized
for use on stand-alone/remote PCs. Includes Personal MHS and
allows users to send and receive mail with any MHS based
electronic mail system. Includes the ability to run the MHS
Connectivity Manager from within the 2KB TSR without exiting
your current application.
* ExpressIT! Windows Client - An upgrade for the network version
of ExpressIT! offering native support for the Microsoft Windows
environment, and a wealth of additional features.
* ExpressIT! Remote Windows - A remote version of the Windows
version of ExpressIT! customized for use on stand-alone/remote
PCs. Includes Personal MHS and allows users to send and receive
mail with any MHS based electronic mail system.
A special Windows based MHS configuration utility eliminates the
need to use the MHS Directory Manager.
All versions of ExpressIT! include ExpressIT! Directory Assistance,
facilitating automatic exchange of user directories between ExpressIT!
hosts.
MHS GATEWAYS AND UTILITIES
--------------------------
* MHS Scheduler - An MHS mail agent that provides greater flexibility
in configuring when MHS will connect to a host. On a host-by-host
basis, the MHS administrator can configure different frequencies of
forced connections based on different times of the day, with
separate weekday, weekend, and holiday scheduling possible.
MHS gateways and internetwork connections can also be scheduled.
The companion RunIT! utility simplifies the creation of batch file
gateways...now you can run your tape backup system on your MHS
server.
* MHS Librarian! - An MHS Gateway that allows users to request
information to be forwarded to them via MHS. Requests are
made by placing a keyword in the "SUBJECT" field of the message
that you address to the library. A list of files may be
requested by sending a message with the keyword of INDEX. The
system Admin can also configure MHS Librarian so that selected
users can request files or directories other than those that
appear in the index. Security is provided by a password program
that generates unique daily passwords, a fixed password, or you
can create your own password utility.
MHS Librarian! also supports "discussion lists", similar to
the "list server" concept on the internet.
* PageIT! - An MHS gateway connecting MHS-based electronic mail
systems to full text alphanumeric pagers. Once configured,
sending messages to an alphanumeric pager is as simple as
sending a message from your favorite MHS application.
* ForwardIT! - An MHS mail agent for automatically forwarding
MHS based electronic mail messages. ForwardIT! can forward
(or copy) messages addressed to an MHS address to an alternate
address.
ForwardIT! is most useful in the MHS remote e-mail environment.
By remote, we refer to field workers or business travelers who
operate ExpressIT! Remote, or other MHS compatible remote
software, on a PC or laptop to access their electronic mail
from a distant location. Examples could include a salesperson
between sales calls, a business traveler in a hotel room,
or work-at-home scenarios.
Without ForwardIT!, when mail is sent to a recipient's office
address, MHS does not allow for a remote user to dial into the
network and retrieve mail waiting for their office address. Mail
addressed to this office address can only be picked up at the
office.
In order to send a message to the user's MHS remote, the sender
must assume responsibility for sending a copy of the message to
the remote MHS address.
With ForwardIT!, the user leaves a forwarding address at the
office, and while they're out, all messages will be forwarded,
or copied, to their forwarding address, giving users transparent
access to their electronic mail while away from the office.
This forwarding address can be any valid MHS address, including
addresses via MHS gateways.
* MhsQ! - An MHS gateway interface to NetWare print queues.
Messages can be sent via MHS to a NetWare print queue.
This capability can be useful for MHS remote sites and/or
MHS enabled applications for generating printed output
and/or reports.
MhsQ! can also redirect print queues on one file server
to a remote print queue on another file server via MHS.
* ExpressIT! MHS Directory Assistant - A directory services
gateway that automatically creates and updates user routes
in a multi-host workgroup environment. Add a user at one
host within the workgroup, and the user route will automatically
be created at all other hosts within the workgroup. Add a
new host to your workgroup, and the host and user lists will
automatically be added to other hosts within the workgroup.
(Directory Assistant is bundled with ExpressIT! but is also
available separately.)
* MHSNotify! - A TSR which runs on the MHS mail server only, and
automatically notifies recipients of new electronic mail
received from remote MHS sites, or across internetwork
connections. An excellent alternative to MHSALERT for
DaVinci e-mail users! (MHSNotify! is bundled with ExpressIT!)
REQUESTING TRIAL VERSIONS VIA MHS
---------------------------------
30-Day Trial Versions of many Infinite Technologies Products can
be requested via MHS.
For more information, send an MHS message to LIBRARY @ INFINITE
via CSERVE or NHUB, with a subject line of INDEX.
DOWNLOADING TRIAL VERSIONS FROM COMPUSERVE
------------------------------------------
30-Day Trial Versions of many Infinite Technologies Products are
available on CompuServe! Look for the following files in the
NOVVEN Forum, Library 4:
XPRESS.ZIP - ExpressIT! Electronic Mail (NetWare)
(DOS and Windows versions combined)
EXPDOS.ZIP - ExpressIT! E-Mail (NetWare) (DOS Version)
EXPWIN.ZIP - ExpressIT! E-Mail (NetWare) (Windows Version)
XPRES2.ZIP - ExpressIT! E-Mail (Remote & non-NetWare)
(DOS and Windows versions combined)
REMDOS.ZIP - ExpressIT! E-Mail (Remote & non-NetWare) (DOS Version)
REMWIN.ZIP - ExpressIT! E-Mail (Remote & non-NetWare) (Windows Version)
POPIT.ZIP - PopIT!
ONCALL.ZIP - OnCall!
CASTAW.ZIP - CastAway!
IQUEUE.ZIP - I-Queue!
IQS.ZIP - I-Queue! Server
LOCKIT.ZIP - LockIT!
MHSCED.ZIP - MHS Scheduler
PAGEIT.ZIP - PageIT!
4WARD.ZIP - ForwardIT!
MHSNFY.ZIP - MHSNotify!
MHSLIB.ZIP - MHS Librarian!
EXDA.ZIP - ExpressIT! MHS Directory Assistant
MHSQ.ZIP - MhsQ!
And don't miss our *FREE* utilities (also in NOVVEN Library 4):
NETERR.ZIP - Network error handlers (CRITTER, SHATTACH)
to reboot unattended workstations and clear
network errors.
CREATQ.ZIP - Create NetWare print queues on a volume other
than SYS:
LOGIN.ZIP - Load TSRs from the NetWare Login Script without
losing available memory!
MHSACT.ZIP - Automatically re-activate deactivated MHS
internetwork hosts without operator intervention.
MHSSWP.ZIP - Redirect MHS swap files to a local drive or
VDISK.
MHSBPL.ZIP - Configure MHS 1.5C host to host communications
to use the B+ protocol.
SENDIT.ZIP - Send MHS messages from the DOS command line
or batch files.
Plus, other helpful text files and reports:
MHSGAT.TXT - NetWare MHS and Gateways overview
DOSMEM.TXT - PC Memory management/architecture overview
WINTIP.TXT - Windows vs. NetWare Troubleshooting Tips
...and stay tuned for MORE!!!
FOR MORE INFORMATION, CONTACT:
▄▄████▄▄
▄█▀█▄ ▄█▀▀ ▀▀███▄
█▀ ▀█▄█▀ ███
▀█▄ ▄█▀ ▀█▄▄ ▄██▀
▀▀▀ ▀▀▀▀▀▀
███ ▄███ ███ ███ ▄██
███ ▄▄▄ ▄▄▄ ▄███▄ ▄▄▄ ▄▄▄ ▄▄▄ ▄▄▄ ▄███▄ ▄▄▄▄
███ ███▀ ███ ███ ███ ███▀ ███ ███ ███ ███▄██
███ ███ ███ ███ ███ ███ ███ ███ ███▄ ▀██▄▄▄
T E C H N O L O G I E S
11433 Cronridge Drive, Suite H
Owings Mills, MD 21117
+1-410-363-1097
FAX: +1-410-363-3779
MHS: Support @ Infinite
CompuServe: >MHS:Support @ Infinite (or 73270,405)
Internet: Support@Infinite.MHS.CompuServe.com
Technical Support provided on the CompuServe Information Service in
NOVVEN Section 4 (GO INFINITE)